Roofing Insulation

Typically test values density :30-32 kg/m³ compression strength : >= 250 kpa water absorption by submersion : <1%(v/v) thermal resistance of 25mm thick board @ avg temperature (10°c) :>=0. 89 m³ k/w thermal conductivity of 25mm thick board @ avg temperature (10°c) <= 0. 028 w/(mk) insuboard can be protected from fire by facing material or complete encapsulation. When installed correctly, (by protecting insuboard™ from ignition sources and damaging heat build up) it does not represent fire hazards. Use of proper ppe (personal protective equipment) is recommended, during installation. General service temperature for insuboard™ is -so °c to +75 °c. Direct contact with surface exceeding 75°c, such as chimney, heater vent, steam pipe, etc. To be avoided. Prolonged exposure to sun light will cause discoloration of the product; it is recommended to store the product covered with pe film at dry and cool place away from sunlight. Adhesive based on solvents of polystyrene may erode the surface of xps. Use of adhesive at actual site to be preceded by prototype demonstration. Please contact supreme representation for more information regarding application and handling process. Good. Thermal insulation value to weight ratio. Closed cell structure with homogeneous composition offers high resistance to water absorption & vapour diffusion therefore no change in thermal resistance with time. Use of environment friendly (non-ozone depleting) blowing agent. Good mechanical strength offers durable exterior wall structure. Xps demonstrate good 'walk-ability' hence eminently suitable as roof insulation material. Light, rigid and easy to handle with no need for special protection. Easy stacking, non-bending and non-friable, hence no dust issues, making the product easy to handle from the production site to the building site. Non-toxic, non-itchy, non-irritant and no identified health and safety issues in working with xps. Immune to attack from pests, rodents, bacteria and microorganisms. Xps is not a nutritional source for insects and animals hence allowing integrity of the insulation system for very long period. Easy to cut & use for speedy installation can be glued by adhesive tape / special polymer adhesives, or fixed by regular tools. At the end of life building life, the xps can be recovered and recycled.

Twiga Glass Wool Insulation, which is widely used for thermal and acoustic insulation applications, is available in rolls, slabs and high density rigid boards (known as MFMB).

A large variety of facings are available, including:-

• Reinforced aluminium foil
• WMP-10
• WMP-30
• WMP-VR
• ASJ 30
• Black glass tissue
• Black cloth

Spectrum has to Its credit execution of projects more than 18,00,000 sq. ft. spread over variety of applications, viz. Industrial Buildings, Warehouses, Hospitals, Resorts, Club Houses, Office Buildings, Malls, Community halls etc.

We specialize in pre-engineered metal building where we offer a variety of pre-engineered metal buildings to serve almost any project need. From light duty residential storage, commercial purpose, institutional, to medium and heavy-duty Industrial purposes we have the building you need. We offer a range of multipurpose basic buildings that provide an unbeatable combination of quality, economy, and fast project completion.

Designing of Structure

• Supply of
• Steel structure
• Pre engineered buildings
• Roof and wall cladding pre-coate
• Sheets
• Metal deck
• Ventilators
• Skylight
• Insulation
• Screws

Application: Building rolls are designed mainly for the thermal insulation of roofs and walls. These high temperature resistant rolls are suitable for use in pre engineered buildings, pre fabricated houses, poultry farms, HVAC ducting etc. It is also used for roofing insulation or thermal & acoustic insulation over false ceilings. 
Service Temperature: It can withstand temperatures upto 750° C. 
Fire-Safety: Non-combustible when tested to BS 476. 
Facing: Faced with reinforced aluminium foil.Other facings available on request. 
Thermal conductivity: Product shows remarkably low thermal conductivity values when tested in accordance with BS 874 : 1986. R value for thermal resistance is 1.56m².k/w, at 10ºC for 50mm thickness. 
Moisture: Does not absorb any moisture from the air. Moisture has no effect on the stability of the building roll.

INSUreflector is a radiant reflective insulation material made of polythylene air bubble film (ABF) laminated with aluminum foil on one or both sides. It is a low e-reflective insulation material with a low mass to air ratio, which effectively blocks the radiant heat transfer. The bright surface of the aluminium foil, which encases the FR polyethylene air bubble material, reflects 96% to 99% infra-red radiation received by the surface of the heated slated roof. The placement of the radiant barrier shall be in a manner to provide an air space below the roofing sheets or between vertical cladding for its effective utilization.

Features & Benefits

• High reflective value-Reflects 96% to 99% of radiant heat
• Unaffected by alkalis, alcohols, detergents, petrochemical products and most mild acids
• Non-toxic and fiber free-Environment & User Friendly
• Negligble water vapour transmission even after 28 days
• Corrosion resistant
• Fire Characteristic-Conforms to BS 476 Part 6 & 7. Class 'O' & Class 1 Category respectively
• Excellent tensile strength; puncture and tear resistance
• Non-carcinogenic. Chemically inert and does not any formaldehyde or other combustible Volatile Organic Compounds(VOC)

Industries

• Pharmaceuticals
• Industrial and Poultry sheds
• Textile Mills
• PEBs
• Airports
• Logistic warehouses
• Skating Rink
• Manufacturing units and many more

Application

• Underdeck Insulation
• Wall Insulation

Available in

• One side aluminium foil and other side milky white film
• Both side Met Pet
• One side Met Pet and other side aluminium foil
• Rolls of 75 mtrs. length & 1250 mm width